Grundfos CRNE Series CRNE 5-24 99076128 24-Stage Centrifugal Pump With Integrated Frequency Converter and Sensor
Vertical, multi-stage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via combined DIN-ANSI-JIS flanges. The pump is fitted with a 3 ph, fan cooled, permanent magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The operating panel on the motor terminal box features a 4 in TFT display, pushbuttons and the Grundfos eye indicator. The display gives an intuitive and user friendly interface to all functions. The pushbuttons are used to navigate through the menu structure to access pump and performance data on site and enable setting of required set point as well as setting of pump to "Min" or "Max" operation or to "Stop". Communication with the pump is also possible by means of Grundfos GO remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "actual value", "speed", "power input" and total "power consumption".
Grundfos 24-Stage Centrifugal Pump, Series: CRNE, Model: CRNE 5-24, 440 to 480 V, Amperage Rating: 9.1 to 8.5 A, 60 Hz Frequency, HP Rating: 7-1/2 hp, Phase: 3 ph, 25/32 mm Inlet Connection, Outlet Connection Size: 25/32 mm, 30.4 gpm Flow Rate, Maximum Pressure: 362.59 psi, Maximum Head: 779.9 ft, 3467 rpm Speed, Motor Type: 132E, Motor Speed Rating: 360 to 4000 rpm, Service Factor: 1.15, -4 to 248 deg F, Frame: 213TC, EPDM/Silicon Carbide/Stainless Steel Housing, 8.27 in Overall Width, 51.46 in Overall Height
| Amperage Rating | : | 9.1 to 8.5 A |
| Flow Rate | : | 30.4 gpm |
| Frame | : | 213TC |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 7-1/2 hp |
| Housing Material | : | EPDM/Silicon Carbide/Stainless Steel |
| Inlet Connection Size | : | 25/32 mm |
| Maximum Head | : | 779.9 ft |
| Maximum Pressure | : | 362.59 psi |
| Model | : | CRNE 5-24 |
| Motor Speed Rating | : | 360 to 4000 rpm |
| Motor Type | : | 132E |
| Outlet Connection Size | : | 25/32 mm |
| Overall Height | : | 51.46 in |
| Overall Length | : | 8.27 in |
| Phase | : | 3 ph |
| Series | : | CRNE |
| Service Factor | : | 1.15 |
| Speed Rating | : | rpm |
| Temperature Rating | : | -4 to 248 deg F |
| Voltage Rating | : | 440 to 480 V |