Contact 313-831-7770

  1. pin-int

Grundfos 98126819 GRU98126819

Grundfos MAGNA 1 Series MAGNA1 32-60 F 98126819 Circulator Pump, 34.2 gpm, 8.71 to 107 W, 115-230 V, 0.28 to 1.01 A

  • Manufacturer: Grundfos
  • Brand Name: Grundfos
  • Part#: GRU98126819
  • MPN: 98126819
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading
  • Branch Availability

MAGNA1 circulator pump with easy selection of pump setting the pump is of the canned rotor type, that is pump and motor form an integral unit without shaft seal and with only Two-gaskets for sealing. The bearings are lubricated by the pumped liquid. In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. A pump with no maintenance requirements and extremely low life cycle cost. The MAGNA1 circulator pumps are designed for circulating liquids in heating systems with variable flows where it is desirable to optimise the setting of the pump-duty point, thus reducing energy costs. The pumps are also suitable for domestic hot water systems. To ensure correct operation, it is important that the sizing range of the system falls within the duty range of the pump.

Grundfos Circulator Pump, MAGNA 1 Series, Model: MAGNA1 32-60 F, 34.2 gpm Flow Rate, 60 mm Inlet, 60 mm Outlet, 19.69 ft Maximum Head, 8.71 to 107 W, 115-230 V, 0.28 to 1.01 A, 60 Hz, 175 psi Maximum Pressure, 3516 rpm Motor Speed Rating, GF15/26/40/43 Connection, Flanged Connection, 1 ph Phase, 4 Poles, 104 deg F Ambient, 230 deg F Liquid, Iron, 6.61 in H x 7.91 in W, Additional Information: Glass-Filled PES Impeller Material

Additional Information      :      Glass-Filled PES Impeller Material
Amperage Rating      :      0.28 to 1.01 A
Body Material      :      Iron
Connection Size      :      GF15/26/40/43
Connection Type      :      Flanged
Dimensions      :      6.61 in H x 7.91 in W
Discharge Size      :      60 mm Dia
Flow Rate      :      34.2 gpm
Frequency Rating      :      60 Hz
Impeller Material      :      30% Glass-Filled PES
Inlet Size      :      60 mm
Material      :      Iron
Maximum Head      :      19.69 ft
Maximum Pressure      :      175 psi
Model      :      MAGNA1 32-60 F
Motor Speed Rating      :      rpm
Number of Poles      :      4
Outlet Size      :      60 mm
Phase      :      1 ph
Power Rating      :      8.71 to 107 W
Pressure Rating      :      175 psi
Series      :      MAGNA 1 Series
Suction Size      :      60 mm Dia
Temperature Rating      :      104 deg F Ambient, 230 deg F Liquid Enclosure Type
Voltage Rating      :      115-230 V
    Wide temperature range where the liquid temperature and the ambient temperature are independent of each other
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Grundfos_98126819_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Grundfos_98126819_Instruction_Installation_Manual.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Grundfos_98126819_Specification_Sheet.pdf